Open full LogicCalc →Euro Pallet LDM
A standard EUR pallet (1200 × 800 mm) has a 0.96 m² footprint. Dividing by the common 2.4 m reference trailer width gives 0.40 LDM per pallet for planning.
Quick reference
0.40 LDM is a floor-space planning value. It does not check pallet orientation, mixed sizes, overhang, stackability, trailer geometry, securing or payload.
Practical guide
Use this reference to answer one specific loading question, then verify the real pallet, trailer and legal vehicle limits before dispatch.
Planning conventions such as 0.40 LDM per EUR pallet or a 2.4 m reference width are useful shortcuts, not guarantees of physical fit, payload or legal compliance.
How it works
Read the definition first, apply the shown planning relationship only to matching cargo or equipment, and keep floor space, volume and weight as separate constraints.
When to use it
Use 0.40 LDM per EUR pallet for fast loading-metre estimates when pallets are standard size, non-stackable and planned on the floor.
What to check before dispatch
0.40 LDM is a floor-space planning value. It does not check pallet orientation, mixed sizes, overhang, stackability, trailer geometry, securing or payload.
Worked example
Example: 18 EUR pallets × 0.40 LDM = 7.2 LDM of planning loading length.
Common mistake
Do not use 0.40 LDM for a 1200 × 1000 mm industrial pallet; its common planning value is 0.50 LDM.
FAQ — Euro Pallet LDM
What does this reference actually tell me?
Use this page as a quick planning reference. It summarizes a common nominal value or relationship; it does not certify a specific pallet, trailer, vehicle or shipment.
When is this useful in freight planning?
Apply the value only when the cargo or equipment matches the stated assumptions. For a real load, confirm the actual dimensions, orientation and usable space.
What must I verify before dispatch?
No. Nominal dimensions and planning factors can vary with equipment, body design, manufacturer, load arrangement and operating rules.
What is the most common mistake?
A common mistake is treating a reference value as a guaranteed physical fit or legal capacity. Use it as a first check, then verify the actual vehicle and load.
LogicCalc
Continue in LogicCalc to combine this result with route, cargo, tolls, time and transport costs.
Planning aid only. Vehicle specifications, contracts and legal requirements can vary; verify the actual shipment before dispatch.