Open full LogicCalc →How Many Pallets Fit in a 13.6 m Trailer?
A 13.6 m semi-trailer commonly plans around 33 EUR pallets (1200 × 800 mm) or about 26 industrial pallets (1200 × 1000 mm) on the floor. The counts describe standard layouts, not guaranteed capacity.
Quick reference
Mixed pallet sizes, rotated loading, overhang, non-stackable cargo, door openings, securing requirements and payload can all change the usable count.
Practical guide
Use this reference to answer one specific loading question, then verify the real pallet, trailer and legal vehicle limits before dispatch.
Planning conventions such as 0.40 LDM per EUR pallet or a 2.4 m reference width are useful shortcuts, not guarantees of physical fit, payload or legal compliance.
How it works
Read the definition first, apply the shown planning relationship only to matching cargo or equipment, and keep floor space, volume and weight as separate constraints.
When to use it
Use the comparison when selecting equipment for palletized freight or when a customer gives only pallet quantity and pallet format.
What to check before dispatch
Mixed pallet sizes, rotated loading, overhang, non-stackable cargo, door openings, securing requirements and payload can all change the usable count.
Worked example
Example: 26 industrial pallets × 0.50 LDM = 13.0 LDM, while 33 EUR pallets × 0.40 LDM = 13.2 LDM. Both are planning equivalents within a 13.6 LDM trailer.
Common mistake
Do not add pallet counts from different formats as if every pallet uses the same floor pattern. EUR and industrial pallets consume different planning LDM and pack differently.
FAQ — How Many Pallets Fit in a 13.6 m Trailer?
What does this reference actually tell me?
Use this page as a quick planning reference. It summarizes a common nominal value or relationship; it does not certify a specific pallet, trailer, vehicle or shipment.
When is this useful in freight planning?
Apply the value only when the cargo or equipment matches the stated assumptions. For a real load, confirm the actual dimensions, orientation and usable space.
What must I verify before dispatch?
No. Nominal dimensions and planning factors can vary with equipment, body design, manufacturer, load arrangement and operating rules.
What is the most common mistake?
A common mistake is treating a reference value as a guaranteed physical fit or legal capacity. Use it as a first check, then verify the actual vehicle and load.
LogicCalc
Continue in LogicCalc to combine this result with route, cargo, tolls, time and transport costs.
Planning aid only. Vehicle specifications, contracts and legal requirements can vary; verify the actual shipment before dispatch.